Sis 661fx Graphics Card

Posted on February 18, 2012 by Admin
Sis 661fx Graphics Card

Sis 661fx Graphics Card

Good Morning,
first for all, many thanks for your answer! I tried to boot in the verbose mode, but I couldn't stop the countdown. I don't know why, I red in the handbook every key could do that... I also tried to use tabs or arrows to choose that option, but they didn't work.
Anyway I found an other way. I thought I needed to find a terminal window, so when PCBSD was completely loaded and it asked for the user name, I clicked on "other" and I wrote "root", then I entered the right PW and the system made me enter in the root desktop.
In the bottom of the monitor there was a toolbar with 2 icons: one called "File manager" and the other with a odd name and blue ball shaped. I clicked the ball and I found inside of the menu (maybe "file", but not sure) the terminal simulator.
I entered inside it and gave the command lines you wrote.
After that, my problem was to copy and paste. Paste where?? Luckily before of starting all the process, I had prepared an USB Stick with a txt file. I opened it with the other icon of the toolbar (file manager) and I had my file in which I could paste and save the outputs!
Sorry for the long story, I thought maybe someone else could have the same difficulties.

At last here are the dmesg output:

[root@pcbsd-3234] ~# dmesg
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #3: Tue Dec 27 21:59:00 UTC 2011
root@build9x64.pcbsd.org:/usr/obj/builds/i386/pcbsd-build90/fbsd-source/9.0/sys/GENERIC i386
CPU: AMD Athlon(tm) XP 1500+ (1343.32-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Family = 6 Model = 6 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE, CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR, SSE>
AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow!+,3DNow! >
real memory = 1073741824 (1024 MB)
avail memory = 961372160 (916 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <AMIINT SiS740XX>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <AMIINT SiS740XX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: c3e00000 vs c2c00000
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 741 host to AGP bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xc0000000-0xc7ffffff,0xcfee0000-0xcfefffff irq 16 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <SiS 7012> port 0xdc00-0xdcff,0xd800-0xd87f irq 18 at device 2.7 on pci0
pcm0: <C-Media Electronics CMI9761 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xcfff9000-0xcfff9fff irq 20 at device 3.0 on pci0
usbus0: <SiS 5571 USB controller> on ohci0
ohci1: <SiS 5571 USB controller> mem 0xcfffa000-0xcfffafff irq 21 at device 3.1 on pci0
usbus1: <SiS 5571 USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcfffb000-0xcfffbfff irq 23 at device 3.2 on pci0
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xcfff8000-0xcfff8fff irq 19 at device 4.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:19:66:43:fe:59
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
Consider tuning vm.kmem_size and vm.kmem_size_max
in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <SiS> at usbus0
uhub0: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <SiS> at usbus1
uhub1: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <SiS> at usbus2
uhub2: <SiS EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ata1: DMA limited to UDMA33, controller found non-ATA66 cable
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <IC35L040AVER07-0 ER4OA44A> ATA-5 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 39266MB (80418240 512 byte sectors: 16H 255S/T 16383C)
ada0: Previously was known as ad0
ada1 at ata0 bus 0 scbus0 target 1 lun 0
ada1: <WDC WD2500AVJB-63J5A0 01.03E01> ATA-8 device
ada1: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
ada1: 238475MB (488397168 512 byte sectors: 16H 255S/T 16383C)
ada1: Previously was known as ad1
Timecounter "TSC" frequency 1343318104 Hz quality 800
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H44N RB01> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2
Root mount waiting for: usbus2
Root mount waiting for: usbus2
uhub2: 6 ports with 6 removable, self powered
ugen2.2: <vendor 0x04b4> at usbus2
uhub3: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.09, addr 2> on usbus2
Root mount waiting for: usbus2
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2
ugen2.3: <Microsoft> at usbus2
ukbd0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/6.34, addr 3> on usbus2
kbd2 at ukbd0
ums0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/6.34, addr 3> on usbus2
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/6.34, addr 3> on usbus2
Trying to mount root from ufs:/dev/label/rootfs0 [rw,noatime]...
ugen1.2: <Logitech> at usbus1
ukbd1: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/28.00, addr 2> on usbus1
kbd3 at ukbd1
Cuse4BSD v0.1.21 @ /dev/cuse
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8